Menu

Products / Carrier-1

Carrier-1

Development & test carrier

Carrier board for development, testing and first integration of DroneMate AI modules. Accepts DM3-32 and DM3-8 interchangeably: swap modules without changing the hardware.

Swap
DM3-8 ⇄ DM3-32
81 g
without SoM
M.2
NVMe + Wi-Fi
110×90
mm

Carrier-1 at a glance

Compatible SoMsDM3-32, DM3-8 (interchangeable)
InterfacesUSB 3.0, MIPI CSI, Ethernet, CAN, UART, SPI, I²C, ADC, PWM
ExpansionM.2 NVMe, M.2 Wi-Fi, microSD
DisplayMini DisplayPort (up to 4K) + HDMI (up to 2K)
Temperature−40 … +85 °Cdesign target
Size110 × 90 mm
Height21.8 mmtallest connector, from the CAD model
Weight81 gwithout SoM
Power15–22 WDM3-8 on Carrier-1: 15 W without peripherals, 22 W with peripherals on the carrier connectors
Use caseDevelopment, prototyping, first integration
Flight controllerConnects by cable: UART on J27 (40-pin header), CAN on J8, Ethernet on J59almost all flight controllers have UART, most have CAN, some have EthernetMAVLink with ArduPilot or PX4

Works with

Software

Supplied with the board: a Linux image, a setup guide and a guide to converting and running neural networks on the NPU.

Supported runtimes: ONNX Runtime, TensorFlow Lite Runtime, TVM / DLR.

Best for

Development, prototyping, first integration

Documentation

Detailed datasheet and integration documents are shared under NDA.

3D model

A simplified mechanical model for fit checks: rotate and zoom. The full STEP model is shared under NDA.

Block diagram

Evaluate Carrier-1 on your platform.

Product Details - Request

To receive specifications or technical consultation, please leave your contact details below.