Menu

Products / DM3-8

DM3-8

Cost-optimised AI SoM

The cost-optimised member of the DM3 family. Same form factor and carrier compatibility as the DM3-32, so an integration can start at 8 TOPS and move to 32 TOPS without hardware redesign.

25 g
without heatsink and fan
15–22 W
on Carrier-1
4/8 GB
LPDDR4 RAM
80×55
mm, same as DM3-32

DM3-8 at a glance

AI performance8 TOPS
Measured inference205.44 FPS · 4.85 ms average latencyYOLOX Nano Lite, 416 × 416 input, INT8/INT16latency of the neural network itselfC7x / TIDL accelerator load 84%; max temperature during the test 45.89 °C with a heatsink at 22 °C room temperaturemeasured 17 Nov 2026
CPU2× Arm Cortex-A72, up to 2.0 GHz
Real-time MCU6× Arm Cortex-R5F, up to 1.0 GHz
GPU3D graphics, up to 750 MHz
VideoH.264 / H.265 encode & decode · 2× MIPI CSI (4-lane)
Memory / storageLPDDR4 4 / 8 GB · eMMC 32 GB (up to 64 GB) + microSD
SecurityTPM 2.0 · Secure Boot (hardware root of trust)
Temperature−40 … +85 °Cjunction temperature, design target
Size80 × 55 mm
Height6.9 mmboard and components, from the CAD model
Weight25 gwithout heatsink and fan
Power15–22 WDM3-8 on Carrier-1: 15 W without peripherals, 22 W with peripherals on the carrier connectors
Flight controllerConnects by cable to various flight controllerspre-routed on Carrier-2 Avionix for Cube Orange+ / Blue / Red, Pixhawk v5x / v6xon Carrier-1: UART on J27 (40-pin header), CAN on J8, Ethernet on J59UART link tested with a SpeedyBee V4 flight controller on the SoC reference kit (same processor)MAVLink with ArduPilot or PX4

Software

Supplied with the board: a Linux image, a setup guide and a guide to converting and running neural networks on the NPU.

Supported runtimes: ONNX Runtime, TensorFlow Lite Runtime, TVM / DLR.

Evaluation

Start on the bench: DM3-8 on Carrier-1, the validated reference for your integration.

Best for

UGV controllers, light AI payloads

Documentation

Detailed datasheet and integration documents are shared under NDA.

3D model

A simplified mechanical model for fit checks: rotate and zoom. The full STEP model is shared under NDA.

Evaluate DM3-8 on your platform.

Product Details - Request

To receive specifications or technical consultation, please leave your contact details below.